Parts
We carry an extensive selection of exit device hardware, from retainer hubs and auxiliary kits to latch bolt springs and hex studs. Browse our online store for affordable exit device parts that you will need to install or repair your device.
Having the right exit device hardware for your device will help to ensure that your building will be secure and meet mandatory code requirements. Keeping these devices up to date with exit device replacement parts will help to further ensure building security. The exit device parts that we sell are made by top-tier manufacturers that demonstrate a standard of excellence when making their products.
We offer a variety of exit device replacement parts including dog keys, end caps, mounting base kits, surface and rim strikes, springs, screws, brackets, and so much more. Look at the manufacturer information to be sure that you are ordering the correct exit device part for your device! We encourage you to contact us if you have any questions so that you receive the appropriate exit device hardware for your device.
Our website offers a convenient way to purchase exit device parts from different manufacturers all in one place. When you shop with Robert Brooke & Associates, you can be certain that you will receive reliable, well-made, and long-lasting exit device parts with high performance rates. With our ample supply of some of the finest exit device parts on the market, you can be sure that your facility will remain safe and secure, while also providing a simple and efficient way for people to use exit doors in an emergency.
Order Your Exit Device Parts Right Here
Our selection of exit device replacement parts includes an array of options to fit your specific needs. From rim exit device parts to mortise exit device parts, we have a range of products that are designed to meet the demands of any commercial or institutional setting. Our exit device parts are made from high-quality materials and are built to withstand heavy use and abuse, ensuring that they will last for years to come.
Each brand has its own set of exit device hardware. Some of the exit device parts are interchangeable with other brand parts. Below are some examples of exit device parts that we regularly stock and sell online.
- End Caps
We stock several styles of Adams Rite end caps. We have metal end caps for this brand’s concealed vertical rod and mortise devices, plus we have metal end caps for their surface vertical rod devices which can also serve as a replacement for the plastic version. We also offer their plastic end cap. This exit device part occasionally will have the number HX0471 cast into it. We also carry their EX88 and EX89 end caps, EX76 end caps, and more! Check out our end caps from other brands, as well.
- Strikes
Another common exit device part that we carry is the strike for various devices and brands. You will want to be sure you are ordering a strike that matches up with the brand of your device. For example, the 938 Surface Strike made by Cal Royal is designed for use on the brand’s 7700 and 5000 Series rim devices.
- Springs
We also have springs for many devices and brands. One example of this is the Sargent Lever Return Spring designed for use on the lever trims of their Sargent devices. There are also other types of springs such as the 90 Series Mouse Trap Spring designed for use with the Sargent 9898 Rim Device.
- Pins
Some devices also require another exit device part that is typically referred to as a pin. For instance, we carry the control link pin and the lever trim shear pin kit for use with Von Duprin devices. You can also find push bar pins, pivot pins, dogging pins, and more on our site for many brands.
- Keys
Keys are used for a number of device styles. We have dog keys, dogging hex keys, cotter keys, and more.
- Brackets
A bracket is another commonly used exit device part that you might need to order a replacement for over time. Many brands make devices that require some sort of bracket. Brackets come in several styles such as latch bracket, lift bracket, dogging bracket, pinion support bracket, push bar anchor bracket, mounting bracket, spring tube bracket, mullion bracket, release bracket, and more.
- Guides
You can also order guides on our website for use with specified brands. This includes top bolt guides, bottom bolt guides, rod guides, push bar guides, tailpiece guides, and more.
- Solenoids
We offer solenoids such as the Adams Rite EL8600 Solenoid 31-0833-IP which is designed for use with their Concealed Vertical Rod, the 12-volt or 24-volt Adams Rite EL8800 Solenoid, and the Von Duprin 050535 El Solenoid which is compatible with their 33A, 35A, 98, and 99 devices along with the Dor-O-Matic/Falcon EL1690, EL1790, and EL2390 devices. Browse our assortment of solenoids for more information.
Again, some strikes are interchangeable with strikes from other brands. This includes the Monarch/Falcon 299 Strike designed for use with the 24-R and 25-R Devices which is the exact same exit device part as the Von Duprin 299 Strike. We also stock electric strikes, dust-proof strikes, roller strikes, and more.
That’s not all. We also offer so many more exit device parts and accessories. From cover plates and compression springs to dogging kits and trim sets, we have everything you need to ensure that your panic devices are functioning properly and are up to building code. Our exit device hardware is designed to be easy to install and use, making it a great choice for any facility.
Contact Our Team of Experts at Robert Brooke & Associates with your Exit Device Part Questions!
At Robert Brooke & Associates, we are committed to providing our customers with the highest level of service and support. Our team of experts is always available to answer any questions you may have and to help you find the right products for your needs. We also offer fast and reliable shipping, so you can get the products you need when you need them.
So if you are looking for well-built, unyielding exit device hardware, look no further than Robert Brooke & Associates. With our wide selection of products and our commitment to customer satisfaction, we are the go-to source for all your exit device part needs.
-
Cal Royal 2000 Alarmed Exit Device
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000 -
-
Cal Royal 2000 Series Exit Device Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Doromatic Exit Device 1990/2090 Cross Bar
Dor-o-Matic 990/1090/1990/2090 Cross Bar
41" or 48" cross bar is sent, cut to size. 48 inch bars are not in stock, leadtime is 3 weeks
Doromatic part # CBAR or 47285197 for 41" bars and 47286482 for the 48" bars.
The Dark Bronze Cross Bars are a very dark bronze and will be closer to black.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199039 -
Jackson Exit Device Center Case 1085/1095
Jackson 1085 Hinge Case, also the 1095 Jackson inactive Case. Includes everything in the housing.
The housing mounting studs are 6-5/16" on centers
Jackson part # 30-982 Right Hand Body and Arm Assembly
Jackson part # 30-983 Left Hand Body and Arm AssemblyHousing Shown in Aluminum
G1085XX -
Jackson 1095P Paddle Exit Device
The Jackson 1095P Paddle Exit Device is designed for use on narrow style aluminum storefront doors. It features the same housing as the Jackson 1095, but with a paddle instead of a cross bar. This peice is designed for aluminum or steel doors, it will not work on wood doors. The device mounts on surface studs that need to be drilled and tapped on the door, if the door is wood, the threads will simply pull out.
1095P- -
Jackson Exit Device 1295 Push Pad End Cap Package
Jackson Exit Device 1295 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2677
New Jackson Part # 30-2654G302677- -
Jackson Exit Device 1285 Push Pad End Cap Package
Jackson Exit Device 1285 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2661
New Jackson Part # 30-2652-628 or 30-2652-313G302661- -
Von Duprin 88 Active Case
Replacement Von Duprin 88 Rim Device Center Case
Includes all of the internal parts and hardware. This case works with all Exit Only, Dummy and Night Latch Trims. Call or email us if you have a Lever, Knob or Thumb Piece Trim.
Von Duprin Part # 050409
Old Part # 10166288R10- -
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R70- -
Von Duprin Exit Device 88 Lever Arm Right Hand
Von Duprin Exit Device 88 Lever Arm Right Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. Includes the dog screw, wedge ring, wedge tite screw and wedge, and sometimes they come with the axle
Von Duprin Part # 050438
Old Part # 10074488R80- -
Von Duprin Exit Device Keyed Mullion Retrofit Kit
Von Duprin Exit Device Keyed Mullion Retrofit Kit
Keyed Removable Steel Mullions makes removal faster and easier by a single operation of the mortise cylinder. Once mullion is removed, large equipment or furniture can freely pass through the opening. The unit will self lock when re-installed, without use of the cylinder key. Uses a 1-1/4´´mortise cylinder with a
straight cam (Schlage cam reference B502-191). Cylinders are sold separately. Prefix mullion model with “KR”.Von Duprin Part # 050168
KR54 -
Von Duprin 8827-F Top Latch Cover Kit
Von Duprin 8827-F Top Latch Cover Kit - 050465
This is the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050465
Old Part # 96120688VR30F
