Manufacturers| Metpar Toilet Partition
We are leading bathroom stall door hardware distributors. We sell bathroom stall door hardware that was manufactured by top name brands in the bathroom stall hardware commercial market today.
If you are working on renovating a commercial bathroom in a public building, you’ll want to be sure you’re using toilet stall door hardware that was produced by highly regarded stall manufacturers. This will ensure that the bathroom partition hardware that you use is tough and damage resistant for the long haul.
At Robert Brooke & Associates, we want your shopping experience to be a cinch. That’s why we have a website where you can order bathroom stall parts online from the cozy setting of your home or office.
Our warehouse and office location is Troy, Michigan, but we ship toilet partition hardware across the United States and to Canadian locations. Check the Lead Time to see if your item is in stock at our warehouse to get a rough estimate of when it will ship and then place your order. We will get started on putting together your shipment ASAP whether we currently have the items that you need at our warehouse or they are only currently available at the manufacturer’s factory.
Toilet Stall Hardware Manufacturers
Below you will find a list of the manufacturers we work with. You can gather some important info about these brands by visiting their webpage. If you already know the name of the brand that makes the bathroom stall door hardware that you need for your renovations or repairs, then you’re already halfway there.
- Accurate bathroom stall parts
- All American toilet stall door hardware
- American Sanitary stall parts
- Ampco toilet stall door hardware
- Bobrick toilet stall door hardware
- Fiat toilet stall hardware
- Flush Metal bathroom stall parts
- General bathroom stall parts
- Generic (non-brand) bathroom stall door hardware
- Global bathroom stall door hardware
- Hadrian bathroom stall door hardware
- Hiny Hiders partition parts
- Knickerbocker partition parts
- Metpar bathroom stall door hardware
- Mills partition parts
- Sanymetal bathroom stall hardware
Bathroom Stall Door Hardware Sold Online
Have you seen our extensive online selection of toilet stall hardware? You will undoubtedly have plenty of options when choosing the most suitable restroom stall door hardware for your restroom project.
Our restroom stall door hardware consists of assorted parts that will come in handy when refurbishing a public restroom or replacing a worn-out stall part in a commercial restroom. Our supply includes hinges, latches, keeper bumpers, pintles, hinge pins, hinge cams, hinge repair kits, coat hooks, pilaster shoes, door pulls, door stops and more restroom stall door hardware made by prominent manufacturers in the restroom stall industry.
Restroom Stall Door Hardware Distributors
Our company has been supplying dependable bathroom stall door hardware for more than 40 years. We have built a team made up of highly qualified and experienced professionals who have expertise in the bathroom stall hardware commercial industry.
Our team has worked with many businesses and organizations such as athletic facilities, educational institutions, convention centers and warehouses to name a few. We love providing bathroom partition hardware that our customers can feel confident when using to make necessary repairs to the commercial restrooms they are fixing up.
Our experts are hard at work supplying our customers with the best stall hardware made by respected bathroom stall part manufacturers, but we will always take the time out to assist you when you have an order question. You are welcome to contact us at Sales@RobertBrooke.com or at 1 (800) 642-2403 about your order of toilet partition hardware from our site if you require any type of assistance.
-
Metpar Slide Bolt Latch
Metpar Partitions Slide Bolt Latch with indicator Chrome plated Zamac die cast construction. The latch housing face plates measure 1-3/4" wide by 1-1/4" high. The latch thickness is 1-1/16". The latch bolt measures 3/4" by 3/16" with a 15/32" throw. Also known as a Metpar Bathroom Stall Concealed Latch. Manufacturer part # 4240, 13882. Metpar Toilet Partitions is the only manufacture that we know of that uses this latch.
9OC400 -
Metpar Keeper Bumper Concealed
Metpar Partitions Keeper Bumper 1-1/4" Round Edge Post
Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-1/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/32" deep. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5520.
Shipped with mounting screws.
9OC410 -
Metpar Ada Lever Latch Knob Cover
Metpar concealed Ada lever latch knob with cover. Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The latch bolt is 11/32" diameter by 2-21/32" long, the square box has a height of 3/4". Also known as a bathroom stall concealed ADA lever latch cover and knob assembly or a barrier free concealed latch knob, Cover and pin. Manufacture part # 6080.
9OC500A -
Metpar Latch Knob Cover
Metpar Partitions Concealed Latch Knob And Cover
Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". Cover lugs project out 1-7/32" . The latch bolt is 11/32" diameter by 2-21/32" long, the square box has a height of 3/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 5090
9OC300 -
Metpar Top Hinge Pin For Laminate
Metpar Partitions Top Hinge Pin Laminate Hinge Pin 3/8" Diameter x 3-7/16" Long
Knurled steel construction. Hinge pin is 3-1/2" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.
9CP450 -
Metpar Top Hinge 1-1/4 Sq Edge
Metpar Partition Top Hinge For 1-1/4" Square Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The outside dimensions of the U mounting channel are 1-1/4" deep by 2-1/4" high by 1-3/8" depth with a hole spacing of 1-1/2". The hinge lug projects out 1-1/2" by 1/2" thick with a bushing diameter of 3/8". Also known as a Metpar Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3930.
Shipped with mounting screws.
A=1-9/16"
9CP400 -
Metpar Nylon Cam
Metpar Partitions Nylon Cam
White nylon construction. The partition cam head outside diameter is 23/32" and the inside diameter is 1/2". The cams cylinder is 1-13/32" long with a diameter of 5/8". For use with a 1/2" pintle. Also known as a Bathroom Stall Cam. Manufacture part # 98275.
9CP375 -
Bottom Hinge For 1-1/4 Round Edge
Bottom Partition Hinge For 1-1/4" Round Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The hinge measures 1-1/4" deep by 2-1/8" high by 1-7/16" wide. The U part of the hinge measures 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The hole spacing is 1-1/2". The lug projects out 1-3/32" and is 1/2" thick with a 5/16" diameter hole. Also known as a Bathrrom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 4040. Used on Ampco and Metpar Metal Partitions.
Shipped with mounting screws.
A=1-7/16"
9C3004 -
Metpar Bottom Door Insert For 7/8" Door
Metpar Partitions Bottom Door Insert For 7/8" Door
Chrome plated Zamac die cast construction. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.
9CP325. -
Metpar Bottom Hinge 1-1/4 Sq Edge
Metpar Bottom Hinge 1-1/4" Square Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The bottom hinge U channel measures 1-1/4" deep by 2-1/4" high with an insert depth of 1-5/16". The hole spacing is 1-1/2" between screw holes. The hinge lug projects out 1-9/16" by 1/2" thick with a 5/16" diameter hole. Also known as a Metpar Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3430.
Shipped with mounting screws.
A=1-9/16"
9CP300 -
Top Hinge 1-1/4" Round Edge
Top Partition Hinge For 1-1/4" Round Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The outside dimensions of the hinge are 1-1/4" deep by 2-1/2" high by 1-7/16" wide. The U mounting channel is 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The mounting holes are 1-1/2" apart on center. The lug projects out 1-3/32" by 13/32" thick with a 3/8" diameter bushing. Also know as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 4530. Used on Ampco and Metpar Metal Partitions.
Shipped with mounting screws.
A=1-7/16"
9C3503 -
Top Hinge Casting Unplated
Partition Top Hinge Casting
Unplated Zamac die cast construction. The outside dimensions of the top hinge casting are 3-7/16" high by 2-3/8" wide by 1-5/32" deep. The casting features four holes, two of them are 3/8" diameter, one is 7/32" diameter and the fourth is a threaded hole for a 5/16-18 screw. The two U channels have spacings of 13/16" and 1" on the other. Also known as a Bathroom Stall Door Insert - Top 1". Manufacture part # 4546. Used with AMPCO and Metpar Toilet Partitions.
9C3513 -
Metpar Keeper Bumper Inswing
Metpar Toilet Partitions Keeper Bumper For 1-1/4" Inswing Square Edge Pilaster Or Post
Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110
Shipped with mounting screws.
9CP250 -
Metpar Keeper Bumper
Metpar Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post
Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210
Shipped with mounting screws.
9CP200 -
Metpar Bottom Cam Housing Chrome Plated
Metpar Partitions Bottom Cam Housing Chrome Plated
Chrome plated Zamac die cast construction. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4060 Used with General, Metpar and Ampco
91005BC -
Metpar Slide Bolt Latch 9/16" Bar To Door Clearance
Metpar Slide Bolt Latch 9/16" Bar To Door Clearance Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5020. Shipped with mounting screws.9CP100 -
Metpar Partitions Top Pin 3/8" x 3-1/4"
Metpar Partitions Top Pin 3/8" Diameter By 3-1/4" Long For Laminate Partitions
Threaded steel construction. The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584.
9C3504 -
Top Hinge Door Escutcheon For 7/8 Thick Door
Partition Top Hinge Door Escutcheon For 7/8" Thick Door
Chrome plated Zamac die cast construction. The outside dimensions of the escutcheon are 1" deep by 1-5/8" high by 2-3/8" wide with two of the three holes with a diameter of 5/16" and one at 7/32". The inside dimensions of the U are 1" high by 2-1/16" wide. Also known as a Bathroom Stall Door Insert - Top 7/8". Manufacture part # 2740. Used on Metpar and AMPCO Toilet Partitions.
9CP425 -
Metpar Pintle
Metpar Partitions Pintle 5/8" Diameter For Steel Doors
Steel and white nylon construction. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.
Shipped with nut and lock washer.
9C3006 -
Metpar Nylon Cam For Steel
Metpar Partitions Nylon Cam For Steel
White nylon plastic construction. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall heigth of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185
9C3002 -
Metpar Nylon Cam Pintle Combo
Metpar Partitions Nylon Cam Pintle Combo
Black nylon plastic construction. The Metpar Toilet Partiton Nylon Cam measures 7/8" diameter on the cylindrical part and 4-7/8" long to the end of the screw. This part is also known as the Metpar Bathroom Stall Candle Cam. Metpar is the only manufacture we know that uses this type of Nylon Cam Pintle Combination piece. Manufacture part # 97435.
Shipped with lock washer and screw.
9C0235 -
Metpar Bottom Cam Housing Unplated
Metpar Partitions Bottom Cam Housing Unplated
Unplated Zamac die cast construction. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4066
9C0140
