Search results for: 'towel for one wast singl'

The GS920R One-Piece Rubber Stair Tread has a 3/16" thick nose and tapers to 5-16" at the back.  The nose is adjustable and tapered for a perfect fit.  The benefit of a one piece tread is the ease of cleanng, there is not a groove at the back of the step to collect debris. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.

The 920R One-Piece Rubber Stair Tread has a 3/16" thick nose and tapers to 5-16" at the back.  The nose is adjustable and tapered for a perfect fit.  The benefit of a one piece tread is the ease of cleanng, there is not a groove at the back of the step to collect debris. They are designed for interior use.

Use adhesive where Grit Strip is applied to porous surfaces such as wood or concrete. Grit Strip adhesive is recommended as a sealer; will give a better, longer lasting bond. Recommended application temperature is 60 degrees and above. One quart covers approximately 50 square feet (single coat) of Grit Strip; available in quart and pint units.

Adhesive information

Non-fading superior aging properties make this oil, grease, chemical and stain resistant matting a popular item. Non-combustible; tear, cut, impact and ozone resistant; high tensile strength and elongation properties; single piece rolls. Use inside or outside. Round ribbed corrugations run lengthwise, easily cleaned with soap and water.

GREASE AND OIL RESISTANT — NO FABRIC

Pricing below is per linear feet, Black Only, Size is the Width

A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble. One gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.

Adhesive information

Description

SPECIFICATIONS:

• Koroseal vinyl rib design stair treads
• Thickness: 1/8"
• Depth: 9-5/8"
• Snap on nose
• Sizes available: 18", 24", 30", 36", 42", 48" or 72"
• Colors available: Brown, Black

STAIR TREAD MOUNTING TAPE

Speeds installation of vinyl stair treads without the mess! Tape is sold in 4" wide rolls of 164 feet.

We recommend two strips of tape per tread. One on the nose and one at the back. As an example for the 36" tread you would need 72" or 6' of tape.

The 2020 is a smooth surface rubber stair tread with Grit Stripping on the nose. These treads are the same as the 7020 Heavy Duty Treads with Grit Tape on the nose. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. The treads are 1/4" thick at the nose and taper to 3/16" at the rear. These treads are only available in Square Nose. They are designed for interior use.

Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".

Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.

Purchase the 9" model here.

Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".

Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.

Purchase the 7-1/2" model here.

GSA11 ALUMINUM STAIR TREADS

Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".

Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.

Purchase the 11" model here.

For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps. A rapid drying, long range contact cement; specially formulated for Musson stair coverings. Brush on application; use on back of treads and back of nosing. Contains solvents, extremely flammable. 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 5 gallon containers.

If ordering the gallon or 4 gallon pail, it will ship via freight truck. If you would prefer something that ships Fed Ex Ground, please order the 300 Stair Tread Adhesive.

Adhesive information

DR-CT DIAGONAL RIB CARPET TILES
An attractive and functional entrance matting alternative; heavy duty modular carpet tile with excellent scraping and dirt removal properties for high traffic areas. Designed for interior use in entrances, vestibules, lobbies, between double doors, on ramps or in elevators.

Install in a recess or on the surface. Our easy release adhesive allows you to remove worn or damaged tile which is easily re-adhered. Tile can be switched to decrease traffic patterns; lasts longer, looks better. Vinyl or Aluminum beveled edging available.

3/8" thick; 19-11/16" x 19-11/16" square tile; diagonal rib pattern woven of 100% polypropylene pile yarn with a bitumen backing.

SPECIFICATIONS--No. DR-CT

DR-CT Diagonal Rib Carpet Tiles made of 100% polypropylene pile yarn with a bitumen backing in areas as indicated on drawings. Tile shall be of first quality commercial grade carpet, free of surface defects. Install tile in an alternating rib parquet pattern in indicated recess with recommended easy release adhesive, (or on surface area using vinyl edging or aluminum beveled frame). Tile shall be 3/8" thick, 19-11/16" x 19-11/16" square carpet tile. Select from standard carpet colors of Cranberry, Blue, Beige, Teal, Gray, Chocolate or Charcoal.

one DR-CT Diagonal Rib Carpet Tile covers 2.69 square feet

Improve safety and prevent worn carpet edges on steps; for new or renovation work. Butt 1/4” to 3/8” thick carpet against both the top and bottom lips of butt-type carpet nosing. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.

SPECIFICATIONS:

Furnish and install No.140 Koroseal Vinyl Ribbed Carpet Nosing; 3-1/8” deep; 2-1/2” nose depth; square adjusta-nose. Lap 5/16”, 1/4" or 3/8” carpet over lip on both the step and riser. Select from standard colors of black, brown.

Shipping:   Due to shipping costs, this product is shipped in two 48" sections

The 7520R is a smooth surface rubber stair tread.   These treads come in Square and Round Nose, this page is for the Square Nose, for Round Nose search 7520RRD. The treads are 1/8" thick along the entire depth of the treads, and have a nose that drops down 1-9/16".  For the Grit Stripped version you would order the 220 or the 2520.  The 220 comes with two 3/4" grit strips, the 2520 would be the visually impaired version with one 2" wide strip. They are designed for interior use.

The 220-2520 is the Grit Stripped version of the 7850R Service Weight Smooth Rubber Treads.  The 220 comes with two 3/4" grit strips, the 2520 would be the visually impaired version with one 2" wide strip. The treads are 1/8" thick along the entire depth of the treads, and have a nose that drops down 1-9/16". They are designed for interior use.

SPECTRA RIB CARPET MAT-OLEFIN

Ribs that scrape, valleys that hold dirt and moisture. Ribbed carpet surface wipes shoes better, saves on clean up time of your floors. Shaded carpet effect brightens your entryway.

Available in Stock Sizes or Custom Lengths 24", 36" or 48" wide.

See more views box for colors.

Vinyl Stair Treads GS365 with Grit Strip

This is one our highest volume vinyl stair treads. Heavy duty to stand up to most applications with the safety of inlaid grit strips. Made in the USA

SPECIFICATIONS:

Furnish and install No. GS365 Koroseal Vinyl Stair Treads
Grit-Strip rib design stair treads; 7/32" thick, 12" deep; 1-1/4" square nose; two black* 1" wide abrasive Grit-Strips inlaid in tread, 1" from front edge, spaced 1-1/4" apart; contains no asbestos fiber; made of first quality homogenous vinyl, color throughout thickness; free from imperfections which might lessen serviceability. Meets Federal Specs. RR-T-650E Type B. Select standard length of 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid color of Brown or Gray.

For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors. May also be used with sanded back molded rubber stair treads. Not recommended where excessive moisture exists; Non-Carcinogenic; Non-Toxic; safe for the environment and freeze thaw stable. See label for complete instructions. Ready to trowel in 1 gallon or 4 gallon cans. Covers 150 square feet per gallon.

Adhesive information

Ideal for residential and light commercial applications. This is one of our favorite stair treads for the do-it-yourselfers. Easy to install with very easy cutting, ideal for basement steps. Lightweight, economy gauge with a round rib design. Curve-around nose fits round or square nose steps. Made in the USA.

Specifications:

• #334 Koroseal Vinyl economy stair treads
• Round rib surface design
• Thickness: 5/64"
• Depth: 10"
• Curve-around nose
• Sizes available: 18", 24", 36", 48" or 72"
• Colors available: Brown, Black

The GS780R Rubber Stair Tread is a Raised Disc.  It features an adjustable nose that drops down 1-9/16".  The nose is 1/8" thick.  You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.

The GS820R is a low profile raised disc design for lighter traffic.  The tread is 3/16" thick at the nose and tapers to 1/8" at the back.  The nose has a 1-9/16" length.  You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips.  These treads are easily trimed in the field with a straight edge and utility knife. The nose is not adjustable and is not tapered. They are designed for interior use.

DIRT CATCHER TILE DC225

A heavy-duty tile packed with 60 ounces of 100% solution dyed polypropylene is ideal for any entrance area where extreme traffic occurs. This tile's unique dirt pocket configuration effectively removes and traps dirt and moisture.

The Dirt Catcher Tile comes with a 7 year wear warranty on flat surfaces and is permanently anti-static.

1/2" thick; 19-11/16" x 19-11/16" square tile. Each tile is approximately 2.69 square feet.

Sold only in boxes of 12 pieces. Pricing is for a box of 12 pieces.

The GS620D Rubber Stair Tread with Grit Stripping. The GS620D is only available in the square nose.   This tread offers an 1/8" nose thickness, has an adjustable and tapered nose. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.

Standard narrow corrugated surface is completely tested through- out. Conforms to ANSI/ASTM D178 J6.7 Type II Class 2. Stays in place, is slip resistant. With care, lightweight carts can be used over this runner.

Meets Dielectric Test Volt, RMS AC 30,000; Proof Test Volt, RMS AC 20,000. Recommended maximum use Volt, RMS AC 17,000.

Fully meets ASTM specifications branded on back. Black color only. Available in standard rolls or cut to exact length desired.

Sold by the foot

The GS520S Rubber Stair Tread with grit stripping has a 1/4" nose thickness which tapers down to 1/8" at the back.  The nose drops down 1-9/16", and the nose is not adjustable and is not tapered. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.

A tough mineral-coated waterproof non-slip surfacing with a pressure sensitive adhesive back. Helps grip foot traffic, preventing slipping, easy to apply; use inside or outside. Rectangular sizes with rounded corners or in rolls cut to any length. We suggest priming surfaces with Musson Grit Strip Adhesive before applying. Ideal for entranceways, ramps and walkways, stairways, heavy traffic areas, work areas, loading docks, recreational vehicles, boats & docks, cafeterias, kitchens, coolers, around drinking fountains and ice machines.

Black Rolls only on this page, see Grit Strip Colored Rolls or Grit Strip Precut

A tough mineral-coated waterproof non-slip surfacing with a pressure sensitive adhesive back. Helps grip foot traffic, preventing slipping, easy to apply; use inside or outside. Rectangular sizes with rounded corners or in rolls cut to any length. We suggest priming surfaces with Musson Grit Strip Adhesive before applying. Ideal for entranceways, ramps and walkways, stairways, heavy traffic areas, work areas, loading docks, recreational vehicles, boats & docks, cafeterias, kitchens, coolers, around drinking fountains and ice machines.

Pre cut pieces on this page only

This is another of our favorites. This vinyl stair tread features a longer nose, so the front edge of the step is covered on a standard 2 x 12 plank step. This tread is idea for the type A personality person how wants everything perfect and covered. Applications for this tread are residential, multi-family dwellings, apartment houses, and low income housing. These treads are easy to cut, clean and install. They are designed for interior use. Made in the USA.

Features:

• Extra long square nose
• Easy installation
• Easy clean
• Meets Fed. Specs. RR-T-650E Type B
• Contains no asbestos fiber
• Made of first quality homogeneous vinyl
• Color throughout thickness
• Free from imperfections which might lessen serviceability

Specifications:

• 355 Koroseal vinyl rib design stair treads by Musson Rubber
• Thickness: 1/8"
• Depth: 12"
• Nose: 1-3/4"
• Sizes available: 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96"
• Colors available: Brown, Sand, Gray, Black