Search results for: 'closer latch tread tip acrylic strip t'
-
Reinforced Rubber Chair Tips 3/4"
Reinforced Rubber Chair Tips For 3/4"Outside Diameter Round Legs
One of the biggest problems with rubber chair tips is the metal leg punching through the rubber feet. This happens because the metal chair legs are sharp and blunt. By installing a chair tube cap first, the rubber chair leg has more of a surface area to displace the weight.
Part # - Color
RCT75BTC - Black
RCT75GTC - GrayRCT75XTC -
Norton 8301 Door Closer
Norton 8301 Door Closer, Sometimes called the Norton 8301 Omni Door Closer
- Adjustable spring sizes 1 thru 6
- Rack-and-pinion design
- 1-1/4" (32mm) diameter piston
- 5/8" (16mm) diameter pinion journals
- Cast aluminum body
- Standard, separate and independent, latch,
sweep and backcheck intensity valves - Staked valves
- Molded plastic cover standard
This closer replaces the 8301BF Norton Door Closer. The standard 8301 now meets the Barrier Free Requirements.
8301- -
Reinforced Rubber Crutch Tips 7/8 inch
Reinforced Rubber Crutch Tips For 7/8" Outside Diameter Round Chair Legs. Help protect your floors from damage. This application is for when your metal chair leg punches through your Rubber Chair tip. Using the Tube Cap on the chair leg first, then apply the Rubber Crutch Tip over the leg will solve that problem by providing more of a surface area to displace the weight. Available in black or white and a variety of sizes.
Part # - Color
CRT87BTC - Black
CRT87WTC - TanCRT87XTC -
Reinforced Rubber Crutch Tips 1 inch
Reinforced Rubber Crutch Tips For 1" Outside Diameter Round Legs. One of the biggest problems with rubber crutch chair tips is the metal leg punching through the rubber feet. This happens because the metal chair legs are sharp and blunt. By installing a chair tube cap first, the rubber chair leg has more of a surface area to displace the weight.
Part # - Color
CRT100BTC - Black
CRT100WTC - WhiteCRT100XTC -
920R One-Piece Tread and Riser
The 920R One-Piece Rubber Stair Tread has a 3/16" thick nose and tapers to 5-16" at the back. The nose is adjustable and tapered for a perfect fit. The benefit of a one piece tread is the ease of cleanng, there is not a groove at the back of the step to collect debris. They are designed for interior use.
920R -
300 Series Stair Tread Adhesive
A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble. One gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.
300ADH -
International Door Closer 8050 Series
International Door Closer 8050
This closer is an ideal replacement closer for just about any Store Front Door. We recommend this closer because it will fit any size door, and you can adjust the spring tension to make it easier for the elderly, smaller children and the handicapped. This door closer will work on a Right or Left Hand Door, Push or Pull side or Top Jamb mounting, it ships with a parallel arm bracket, arm and mounting screws.
Length of Closer 9-3/4”, Horizontal Mounting Holes 9-1/16”, Vertical Mounting Holes 3/4”, Overall Height 4-21/32”, Height of Closer 1-21/32”, Projection from Door 2-29/32”, 4 Adjustments - Closing and Latching Speed, Power and Back Check.
We ship the 8051-TP DU or 8051-TP AL depending on the color you choose. This closer includes a full plastic cover
8050- -
Emco W Wall Mounted Hook Strip
The Emco W Wall Mounted Hook Strip is an ideal complement under any shelf system. May also be used by itself. Comes with double pronged poly-carbonate hooks. The wall bracket measure 6-1/4" and are 1-7/16" wide, and are constructed of cast aluminum that is then powder coated black. The bar (slat) that the hooks are mounted on is 3/4" high by 1" deep. The slat is available in dark bronze or aluminum. The poly-carbonate hooks measure 3" wide by 2-3/4" high and project out 1-1/2". The hooks are available in Black, Blue, Brown, Gray, Green, Orange, Purple, Red, Yellow, or Assorted Color Hooks. The number of brackets and hooks is determined by the length of the hook strip.
24" racks have 3 hooks/2 brackets
36" racks have 4 hooks/2 brackets
48" racks have 6 hooks/3 brackets
60" racks have 8 hooks/3 brackets
72" racks have 10 hooks/3 bracketsRacks can be made any size up to 50'. Manufacturer will use slip joints so the rack can ship UPS/FEDEX.
EM-W-xx -
International Door Closer 855 Series
International Door Closer 855 Series-Discontinued. If you order this door closer the 885 will be sent, it is the same door closer but also features back check.
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves, Universal application Non-handed for standard top jamb or parallel arm installation.Ships with regular arm and parallel arm bracket.
3/4" x 9-1/16" mounting holes
855- -
International Door Closer 851 Series
International Door Closer 851 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Ships with regular and parallel arm bracket3/4" x 6-3/8" mounting holes
851- -
International Door Closer 852 Series
International Door Closer 852 Series
FEATURESTwo Adjustment Valves: Closing and Latching
speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Shipped with regular and parallel arm bracket.3/4" x 7-3/8" mounting holes
852- -
International Door Closer 854 Series
International Door Closer 854 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves, Universal application Non-handed for standard top
jamb or parallel arm installation.Ships with regular arm and parallel arm bracket.
3/4" x 9-1/16" mounting holes
854- -
Plate Top Single Wheel Caster - Non Swivel - 4" Wheel
Plate Top Single Wheel Caster - Non Swivel (Rigid)- 4" Wheel, 1-3/4" x 3" Hole Spacing. Zinc finish with black rubber wheel. Available with a tread for carpet and a tread for non carpet areas.
KKAC51 hard tread for carpet
KKAC52 soft tread for non carpet surface
KKAC5x -
400 Series Vinyl Stair Treads
400 Vinyl Stair Treads
Heavy gauge sharp-rib design Koroseal vinyl treads for heaviest traffic; 1/4" thick at wear area, easily trimmed to cover and fit any stair step. Install over concrete, metal, wood, terrazzo. Extra heavy thickness at the front "wear area". Meets Fed. Specs. RR-T-650E Type B. They are designed for interior use.
SPECIFICATIONS:
No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.
VST400 -
GSA9 Aluminum Stair Treads
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 9" model here.
GSA9 -
GSA75 Aluminum Stair Treads
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 7-1/2" model here.
GSA75- -
334 Vinyl Stair Treads
Ideal for residential and light commercial applications. This is one of our favorite stair treads for the do-it-yourselfers. Easy to install with very easy cutting, ideal for basement steps. Lightweight, economy gauge with a round rib design. Curve-around nose fits round or square nose steps. Made in the USA.
Specifications:
- #334 Koroseal Vinyl economy stair treads
- Round rib surface design
- Thickness: 5/64"
- Depth: 10"
- Curve-around nose
- Sizes available: 18", 24", 36", 48" or 72"
- Colors available: Brown, Black
VST334 -
GSA11 Aluminum Stair Treads
GSA11 ALUMINUM STAIR TREADS
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 11" model here.
GSA11 -
820R Economy Rubber Stair Tread
The 820R is a low profile raised disc design for lighter traffic. The tread is 3/16" thick at the nose and tapers to 1/8" at the back. The nose has a 1-9/16" length. These treads are easily trimed in the field with a straight edge and utility knife. The nose is not adjustable and is not tapered. They are designed for interior use.
820R -
Grit Stripping - Colored Rolls
A tough mineral-coated waterproof non-slip surfacing with a pressure sensitive adhesive back. Helps grip foot traffic, preventing slipping, easy to apply; use inside or outside. Rectangular sizes with rounded corners or in rolls cut to any length. We suggest priming surfaces with Musson Grit Strip Adhesive before applying. Ideal for entranceways, ramps and walkways, stairways, heavy traffic areas, work areas, loading docks, recreational vehicles, boats & docks, cafeterias, kitchens, coolers, around drinking fountains and ice machines.
GRITb -
355 Vinyl Stair Treads
This is another of our favorites. This vinyl stair tread features a longer nose, so the front edge of the step is covered on a standard 2 x 12 plank step. This tread is idea for the type A personality person how wants everything perfect and covered. Applications for this tread are residential, multi-family dwellings, apartment houses, and low income housing. These treads are easy to cut, clean and install. They are designed for interior use. Made in the USA.
Features:
- Extra long square nose
- Easy installation
- Easy clean
- Meets Fed. Specs. RR-T-650E Type B
- Contains no asbestos fiber
- Made of first quality homogeneous vinyl
- Color throughout thickness
- Free from imperfections which might lessen serviceability
Specifications:
- 355 Koroseal vinyl rib design stair treads by Musson Rubber
- Thickness: 1/8"
- Depth: 12"
- Nose: 1-3/4"
- Sizes available: 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96"
- Colors available: Brown, Sand, Gray, Black
VST355 -
300 Series Vinyl Stair Treads
Description
This is a very good stair tread, but not one of our favorites. The nose on this vinyl stair tread is difficult to work with in some applications. Because the nose has substantial material (thickness) it is tricky to work with. We can send you a sample, so you can see how it fits on your step. It is our lowest cost protection for stairs of homes, duplexes and apartments. Features extra heavy snap-on nose that fits either square or curved nose wood steps that are between 3/4" and 1-1/8" thick. Made in the USA.
SPECIFICATIONS:
- Koroseal vinyl rib design stair treads
- Thickness: 1/8"
- Depth: 9-5/8"
- Snap on nose
- Sizes available: 18", 24", 30", 36", 42", 48" or 72"
- Colors available: Brown, Black
VST300 -
GSA3 Grit Strip Adhesive
Use adhesive where Grit Strip is applied to porous surfaces such as wood or concrete. Grit Strip adhesive is recommended as a sealer; will give a better, longer lasting bond. Recommended application temperature is 60 degrees and above. One quart covers approximately 50 square feet (single coat) of Grit Strip; available in quart and pint units.
GSA3 -
International Door Closer 8052 Delayed Action
International Door Closer 8052 Delayed Action
Same closer as the 8050 Series or 8051P, but with Delayed Action. Delayed Action is a function of the Door Closer hydrualic cylinder. The hydrualic cylinder will hold the door open for up to 30 seconds to allow physically challenged individuals time to get through the door way. Adjustable spring power with separate valves for closing, latching and delay
International Door Closer model # 8052-P DU or 8052-P AL
8052- -
3/4" Round Plastic Chair Tip
Plastic chair tip for 3/4" diameter round tubing chair legs. Protect your floors against scratches and marks. These chair tips are available in tan, gray and black in a variety of sizes. Chair tips help prevent chair legs from coming through and damaging your floors. For Krueger Chairs, Tables and other furniture where the leg has a 3/4" outside diameter.
PCT75T Tan
PCT75G Gray
PCT75B BlackPCT75 -
International Door Closer 885 Series
International Door Closer 885 Series
FEATURES
Three Adjustment Valves: Closing and Latching and back check. Speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation.3/4" x 9-1/16" mounting holes
885- -
Plate Top Single Wheel Caster - Swivel - 4 Wheel
Plate Top Single Wheel Caster - Swivel - 4" Wheel, 1-3/4" x 3"" Hole Spacing. Ball Bearing Swivel with a zinc finish and black rubber wheel. Available with a tread for carpet and non carpet surfaces.
KK9C51 hard tread for carpet
KK9C52 soft tread for non carpet surface
KK9C5x