Tips

View as Grid List

Items 73-104 of 104

per page
Set Descending Direction
Page
  1. Floor Saver Glide Cap Protective Chair Tip

    Floor Saver Glide Cap Protective Chair Tip

    This Glide Cap has a raised ring on bottom to prevent your chairs from scratching your floors, while at the same time extending the life of your current glides. The raised ring will push the dirt that is on the floor away so it will not scratch the floor. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

    This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

    KGCC4
  2. Plastic Chair Tips Round Tubing 3/4 inch O.D. X 11/16 inch I.D.

    Round Black Plastic Chair Tips for Round Tubing chair legs with a 3/4" Outside Diameter X 11/16" Inside Diameter. Available in black only. 

     

    PR75B
  3. Sico Rubber Table Glide-Rubber Chair Tip

    The Sico Rubber Table Glide-Rubber Chair Tip is for use on Sico folding and non folding legs, having 1" outside diameter legs. Steel washer in base for added support.  An ideal replacement might be our reinforced Rubber Chair Tip RCT100XTC

    Sico part # 178

    KGS100
  4. Smooth Bottom Glide Cap Protective Chair Tip

    Smooth Bottom Glide Cap Protective Chair Tip

    This Glide Cap has a smooth bottom to prevent your chairs from scratching your floors, while at the same time extending the life of your current glides. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

    This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

    KGCC3
  5. Felt Based Glide Cap Protective Chair Tip

    Felt Based Glide Cap Protective Chair Tip

    This Glide Cap has a felt based bottom to prevent your chairs from scratching your floors, while at the same time extending the life of your current glides. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

    This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

    KGCC2
  6. Rubber Chair Tips 1"

    Rubber Chair Tips For Legs With An Outside Diameter Of 1". Chair tip is for Hampden, Krueger and Samsonite Chairs. Available in Black or Gray.

    RCT100
    As low as $0.75
  7. Non Skid Glide Cap Protective Chair Tip

    Non Skid Glide Cap Protective Chair Tip

    This Glide Cap has a non skid rubberized bottom to prevent you chairs from sliding, while at the same time providing protection for your floor. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

    This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

    KGCC1
  8. Snapglides-Deep Cup

    Snapglides-Deep Cup caps to fit over 1 1/4" diameter glides. White in color. Attach to your glides to protect your floors from being scratched. Also reduces noise when students move their chairs around. 

    KCG014DP
  9. Snapglides

    Snapglide felt caps to fit over 1 1/4" diameter glides. White in color. Attach to your glides to protect your floors from being scratched. Also reduces noise when students move their chairs around. 

     

     

    KCG014
  10. 7/8" Q-Ball Floor Protector with Felt Base

    7/8" Q-Ball Floor Protector with Felt Base for use on 7/8" outside diameter chair and table legs.The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic. Kit includes: Adaptor for 7/8" Leg, and Q-Ball with Felt Base

    CGQ87F
  11. 7/8" Q-Ball Floor Protector

    The 7/8" Q-Ball Floor Protector is for use on 7/8" outside diameter chair and table legs. The adapter shown on the right fits over your existing glide, and then the Q-Ball slides over the adapter. Constructed of Gray Plastic.

    CGQ87
  12. Rubber Chair Tips 3/4"

    Rubber Chair Tips For Legs With An Outside Diameter Of 3/4"

    For round legs

    For Hampden, Krueger and Samsonite chairs

    Available in Black or Gray

    RCT75
    As low as $0.70
  13. 3/4" Q-Ball Floor Protector with Felt Base

    The 3/4" Q-Ball Floor Protector with Felt Base is for use on 3/4" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic. Kit includes: Adaptor for 3/4" Leg, and Q-Ball with Felt Base

    CGQ75F
  14. 3/4" Q-Ball Floor Protector

    The 3/4" Q-Ball Floor Protector is for use on 3/4" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic.

    CGQ75
  15. Rubber Chair Tips 7/8"

    Rubber Chair Tips For Legs With An Outside Diameter Of 7/8"

    Rubber chair tips for round legs

    For round legs

    For Hampden, Krueger and Samsonite chairs

    Available in Black or Gray

    RCT87
    As low as $0.48
  16. 5/8" Q-Ball Floor Protector with Felt Base

    The 5/8" Q-Ball Floor Protector with Felt Base is for use on 5/8" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic. Kit includes: Adaptor for 5/8" Leg, and Q-Ball with Felt Base.
    CGQ62F
  17. 5/8" Q-Ball Floor Protector

    The 5/8" Q-Ball Floor Protector is for use on 5/8" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic.

    CGQ62
  18. Brunswick Rubber Chair Tip / Glide Front Leg

    Brunswick Chair Front leg Black Rubber Feet with Metal Cap. Fits 5/8" outside diameter tubular legs.  Overall height is 1-3/4", base diameter is 1-1/4". Used on fiberglass shelled Brunswick seats.

    BR1
    $1.24
  19. 1-1/8" Q-Ball Floor Protector

    The 1-1/8" Q-Ball Floor Protector is for use on 1-1/8" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic.

    CGQ112
  20. Brunswick Rubber Chair Tip / Glide Rear Leg

    Brunswick Black Rubber Chair Foot with Metal Cap. Fits 5/8" outside diameter tubular legs.  Used with the Brunswick Old Style Fiberglass shells, for the rear legs.  1-3/4" overall height, with an 1-1/8" base.

    BR2
    $1.24
  21. 1" Q-Ball Floor Protector with Felt Base

    1" Q-Ball Floor Protector with Felt Base

    The 1" Q-Ball Floor Protector with Felt Base is for use on 1" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic.

    Kit includes: Adaptor for 1" Leg, and Q-Ball with Felt Base

    CGQ100F
  22. 1" Q-Ball Floor Protector

    The 1" Q-Ball Floor Protector is for use on 1" outside diameter chair and table legs. The adapter shown on the right fits over your existing glide, and then the Q-Ball slides over the adapter. Constructed of Gray Plastic.

    CGQ100
  23. Brunswick Chair Replacement Caps

    Brunswick Chair Replacement Caps. Metal cap measures 1-1/16" outside diameter by 1" inside diameter by 3/8" tall. This Chair Tip is designed to be used on Brunswick Chairs. 

    BR4
    $0.70
  24. Nylon Glide Caps-1-1/16"

    Nylon Glide Caps-1-1/16". Fits over table and chair glides that have an outside diameter of 1-1/16".  Made of a natural white nylon, that will not color or scratch floors. Protect your floors from scratching with this Nylon Glide Cap. 

    KGC1
    $0.24
  25. Virco Sled Based Glides for 1" Tubing 3/4" Diameter

    VIRCO SLED BASED GLIDES Fits 1" outside diameter tubing. Glide has 3/4" base diameter. Stem diameter is 1/4" x 9/16" high.

    KS062
    $0.63
  26. Nylon Glide Caps-1-3/16"

    Nylon Glide Caps-1-3/16". Fits over table and chair glides that have an outside diameter of 1-3/16".  Made of a natural white nylon, that will not color or scratch floors. Reduce noice from chairs moving and keep your floors from being scratched. 

    KGC2
    $0.53
  27. Nylon Glide Caps-1-7/32"

    Nylon Glide Caps-1-7/32". Fits over table and chair glides that have an outside diameter of 1-7/32".  Made of a natural white nylon, that will not color or scratch floors.

    KGC2-1/2
    $0.48
  28. Nylon Glide Caps-1-1/4"

    Nylon Glide Caps-1-1/4". Fits over table and chair glides that have an outside diameter of 1-1/4".  Made of a natural white nylon, that will not color or scratch floors.

    KGC3
    $0.51
View as Grid List

Items 73-104 of 104

per page
Set Descending Direction
Page