Parts
We carry an extensive selection of exit device hardware, from retainer hubs and auxiliary kits to latch bolt springs and hex studs. Browse our online store for affordable exit device parts that you will need to install or repair your device.
Having the right exit device hardware for your device will help to ensure that your building will be secure and meet mandatory code requirements. Keeping these devices up to date with exit device replacement parts will help to further ensure building security. The exit device parts that we sell are made by top-tier manufacturers that demonstrate a standard of excellence when making their products.
We offer a variety of exit device replacement parts including dog keys, end caps, mounting base kits, surface and rim strikes, springs, screws, brackets, and so much more. Look at the manufacturer information to be sure that you are ordering the correct exit device part for your device! We encourage you to contact us if you have any questions so that you receive the appropriate exit device hardware for your device.
Our website offers a convenient way to purchase exit device parts from different manufacturers all in one place. When you shop with Robert Brooke & Associates, you can be certain that you will receive reliable, well-made, and long-lasting exit device parts with high performance rates. With our ample supply of some of the finest exit device parts on the market, you can be sure that your facility will remain safe and secure, while also providing a simple and efficient way for people to use exit doors in an emergency.
Order Your Exit Device Parts Right Here
Our selection of exit device replacement parts includes an array of options to fit your specific needs. From rim exit device parts to mortise exit device parts, we have a range of products that are designed to meet the demands of any commercial or institutional setting. Our exit device parts are made from high-quality materials and are built to withstand heavy use and abuse, ensuring that they will last for years to come.
Each brand has its own set of exit device hardware. Some of the exit device parts are interchangeable with other brand parts. Below are some examples of exit device parts that we regularly stock and sell online.
- End Caps
We stock several styles of Adams Rite end caps. We have metal end caps for this brand’s concealed vertical rod and mortise devices, plus we have metal end caps for their surface vertical rod devices which can also serve as a replacement for the plastic version. We also offer their plastic end cap. This exit device part occasionally will have the number HX0471 cast into it. We also carry their EX88 and EX89 end caps, EX76 end caps, and more! Check out our end caps from other brands, as well.
- Strikes
Another common exit device part that we carry is the strike for various devices and brands. You will want to be sure you are ordering a strike that matches up with the brand of your device. For example, the 938 Surface Strike made by Cal Royal is designed for use on the brand’s 7700 and 5000 Series rim devices.
- Springs
We also have springs for many devices and brands. One example of this is the Sargent Lever Return Spring designed for use on the lever trims of their Sargent devices. There are also other types of springs such as the 90 Series Mouse Trap Spring designed for use with the Sargent 9898 Rim Device.
- Pins
Some devices also require another exit device part that is typically referred to as a pin. For instance, we carry the control link pin and the lever trim shear pin kit for use with Von Duprin devices. You can also find push bar pins, pivot pins, dogging pins, and more on our site for many brands.
- Keys
Keys are used for a number of device styles. We have dog keys, dogging hex keys, cotter keys, and more.
- Brackets
A bracket is another commonly used exit device part that you might need to order a replacement for over time. Many brands make devices that require some sort of bracket. Brackets come in several styles such as latch bracket, lift bracket, dogging bracket, pinion support bracket, push bar anchor bracket, mounting bracket, spring tube bracket, mullion bracket, release bracket, and more.
- Guides
You can also order guides on our website for use with specified brands. This includes top bolt guides, bottom bolt guides, rod guides, push bar guides, tailpiece guides, and more.
- Solenoids
We offer solenoids such as the Adams Rite EL8600 Solenoid 31-0833-IP which is designed for use with their Concealed Vertical Rod, the 12-volt or 24-volt Adams Rite EL8800 Solenoid, and the Von Duprin 050535 El Solenoid which is compatible with their 33A, 35A, 98, and 99 devices along with the Dor-O-Matic/Falcon EL1690, EL1790, and EL2390 devices. Browse our assortment of solenoids for more information.
Again, some strikes are interchangeable with strikes from other brands. This includes the Monarch/Falcon 299 Strike designed for use with the 24-R and 25-R Devices which is the exact same exit device part as the Von Duprin 299 Strike. We also stock electric strikes, dust-proof strikes, roller strikes, and more.
That’s not all. We also offer so many more exit device parts and accessories. From cover plates and compression springs to dogging kits and trim sets, we have everything you need to ensure that your panic devices are functioning properly and are up to building code. Our exit device hardware is designed to be easy to install and use, making it a great choice for any facility.
Contact Our Team of Experts at Robert Brooke & Associates with your Exit Device Part Questions!
At Robert Brooke & Associates, we are committed to providing our customers with the highest level of service and support. Our team of experts is always available to answer any questions you may have and to help you find the right products for your needs. We also offer fast and reliable shipping, so you can get the products you need when you need them.
So if you are looking for well-built, unyielding exit device hardware, look no further than Robert Brooke & Associates. With our wide selection of products and our commitment to customer satisfaction, we are the go-to source for all your exit device part needs.
-
Falcon-Doromatic MEL1690 Exit Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Voltage: Current:
24 VDC
1 ampReplacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
-
Von Duprin 55NL Cam
The Von Duprin 55NL Cam is one of the handed parts in the housing, the other is the Arm. If you need to change the hand of a housing, you just need to order the other hand Cam.
The Cam shown in the Picture is Right Hand
Von Duprin Part #'s 050355-Right Hand, 050356-Left Hand.
G050355-6 -
Falcon-Doromatic 1690 Exit Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of this page.
1690EO -
Yale 7100 Exit Device
Yale 7100 Exit Device
Door Opening Width:
-36 for 30" - 36" (762 - 914mm) doors
-48 for 36-1/2" - 48" (927 - 1219mm) doors
Door Thickness: 1-3/4" (44mm) standard.
Minimum Stile Width: 4-1/2" (114mm)
Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged
Latchbolt: 3/4" (19mm) deadlocking stainless steel Pullman-type
Strike: 757 (panic),7100EO- -
-
-
Von Duprin 5547EO Exit Device
The Von Duprin 5547EO Exit Device is used primarily on aluminum framed glass doors, otherwise known as Narrow Stile Doors. It is one of the most heavy duty cross bar devices made, and has been in production since at least the 1970's. This device with for 7' high doors, call for doors that are taller then 7'. To order select finish, and door material. If you have a wood door, select wood door, the latches at the top and bottom have additional brackets for mounting.
5547EO- -
Von Duprin 2227 Exit Device Only
Von Duprin 2227 Exit Device Only
Von Duprin 2227 surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call.
Ships with all mounting screws and the 299, 304L and 248L-4 Strike
Von Duprin Part # 2227EO
2227EO- -
Sargent 2727 Exit Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warranty2727EO- -
Dor-O-Matic 2390 231CA Cylinder Kit
The Dor-O-Matic 2390 231CA Cylinder Kit converts your 2390 exit only to a Night Latch or Hold Back function key lock. All the hardware is included in the package to convert your device, except for the Mortise Cylinder. Housing measures 4-1/2" tall by 1-11/16" wide with a 1-1/8" projection. We send the 231CA which includes the Schlage B502-191 Cam. The 239CA is the same kit, but without the Schlage Cam.
No longer Available.
231CA -
Doromatic MEL1790 Rim Exit Device
The same as the Falcon / Dor-o-Matic 1790 with Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Center case and end cap are powder-coated black only.
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field select-able.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Push bar height is 2-1/2.
Stile: 1-3/4" minimum.1 amp 24 volt
Replacement parts are also available
Shipped with all screws and strikes.
MEL1790EO- -
Von Duprin 22 Metal End Cap 900397
The Von Duprin 22 Mechanism Metal End Cap 900397 is new for 2016. This new kit replaces the 900397 with a metal end cap, which is has always been a weak link of the 22 series. The package includes the End Cap, Bracket and the Mounting Screws. This cap and bracket will work on all of the 22 and 2227 series.
Von Duprin part # 900397
G22R10M- -
Von Duprin 22 Exit Device Only
Von Duprin 22 Exit Device Only
Von Duprin 22 rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16"
Ships with all mounting screws and the 299 strike.
22EO -
Sargent 2828 Series Rim Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warrantyG20EO- -
International 8000 Series End Cap
The International 8000 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
E Trim Solenoid PKG
The E Trim Solenoid PKG is used on the FSA/FSE Electric Lock/Unlock Lever Trims. It is sometimes called the 600293 FSA/FSE Solenoid Kit. The unit measure 1-1/2" long by 3/4" diameter. The hole spacing on the mounting bracket is 3/4" on centers.
Monarch/Falcon Part # 600293.
G600293 -
Falcon Monarch Bottom Bolt Guide Assembly
Falcon Monarch Bottom Bolt Guide Assembly
The Falcon Monarch Bottom Bolt Guide Assembly 650387 is used the 19-V, 24-V, 25-V and the XX-V Bottom Rod. The Guide Assembly measures 1-7/8" tall by 1" wide and projects 1-9/16" at the widest projection. The Bottom Bolt Guide is made of zinc plated steel.
Falcon Monarch Part # 650387
G650387
